|
These transducers provide a stable ripple free and OPTICALLY ISOLATED DC output signal for various DC voltage and current input signals. These outputs are accurate, reliable, consitent and stable and are suitable for Telemetering, Dataloggers, PLCs, SCADA systems and control applications.
 Low Cost Design
Excellent linearity
Accuracy ±0.5%
Converts DC Volt, Millivolts, Milliamps to standard DC outputs.
Outputs of 4-20 mA, 0-10V, 0-1mA, 0-20 mA, 1-5V, etc.
UL-94V-0 flame retardent casing
Terminals covered for better protection
Dual output optional
Isolation between input/output/aux. supply
| GENERAL SPECIFICATIONS |
| Accuracy |
±0.5% of rated output |
| Output ripple |
±0.2% RMS |
| Response |
Less than 0.5 Sec. |
| Zero Adj. |
±2% Min. |
| Span Adj. |
±10% Min. |
| Operating Temp. |
0o to 50o C (RH, < 90%) |
| Storage Temp. |
-20o to +70o C |
| Overload Continuous |
2 x Rated current, 1.2 x Rated Voltage |
| Breakdown Impulse Voltage |
1 x 40u 4.5kv (without dewing) |
| Temperature Coefficient |
0.03%/o |
| Insulation Resistance (@500V DC) |
2KV AC for 1 minute |
| Dielectric Withstand Voltage between Input/Output/Power/Case |
> 100 MΩ |
| DC OUTPUT RANGES |
| 0-1V |
>/= 1KΩ |
| 0-5V |
>/= 5KΩ |
| 1-5V |
>/= 5KΩ |
| 0-10V |
>/= 10KΩ |
| 2-10V |
>/= 10KΩ |
| 0-1mA |
</= 10KΩ |
| 0-5mA |
</= 2KΩ |
| 0-10mA |
</= 1KΩ |
| 4-20 mA |
</= 500Ω |
| AUX SUPPLY |
| 0-110V, 230V AC/DC |
| 0-24V, 48V DC |
| DC INPUT RAINGES (any one) |
| 0-75mV, 100mV, 1V, 5V, 10V, 1-5V, 2-10V, 300V |
| 0-1mA, 0-5mA, 0-10mA, 2-10mA, 0-20mA, 4-20mA |
|
